Mail Us: [email protected]
Call For Us: +86-13709018859


Specification |
GES48120M250-500XP |
|
Permitted parallel number |
1-6 |
|
AC mode |
||
Rated input voltage |
120(L1/N,L2/N)/240Vac(L1/L2) |
|
Input phase voltage range |
(85Vac~140Vac)±2% |
|
Frequency |
50Hz/60Hz(Auto detection) |
|
Frequency Range |
47±0.3Hz~55±0.3Hz(50Hz);57±0.3Hz~65±0.3Hz(60Hz); |
|
Overload/short circuit protection |
Circuit breaker |
|
Efficiency |
>95% |
|
Conversion time (bypass and inverter) |
10ms(typical) |
|
Max.AC Input Current |
2pole,185A/185A(L1/L2) |
|
Maximum bypass phase overload current |
2pole,185A/185A(L1/L2) |
|
Inverter mode |
||
Output voltage waveform |
Pure sine wave |
|
Rated output power (VA) |
Split phase:12000 |
|
Single phase:7200(limited by the wiring terminals) |
||
Rated output power(W) |
Split phase:12000 |
|
Single phase:7200(limited by the wiring terminals) |
||
Power factor |
1 |
|
Rated output voltage (Vac) |
120Vac(L1/N,L2/N)/240Vac(L1/L2) |
|
Output voltage error |
±5% |
|
Output frequency range(Hz) |
50Hz±0.3Hz/60Hz±0.3Hz |
|
Maximum Efficiency |
>91% |
|
Overload protection |
(105% |
|
Peak power |
Split phase:18000VA |
|
Single phase:18000VA |
||
Loaded motor capability |
6HP |
|
Output short circuit protection |
Can protect,after continuous short circuit for 1 second |
|
Bypass circuit breaker phase specification |
2pole,63A/63A(L1/L2) |
|
Rated battery input voltage |
51.2V(Minimum starting voltage 44V) |
|
Battery voltage range |
40.0Vdc~58.6Vdc±0.6Vdc(Undervoltage alarm/shutdown voltage/overvoltage alarm /overvoltage recovery...settable on LCD screen) |
|
Power saving mode self-consump tion |
Load per phase is null or less than 25W enter power-saving mode |
|
Battery type |
Lead acid or lithium battery |
|
Maximum charge current(can be set) |
160A |
|
Charge current error |
±5Adc |
|
Charge voltage range |
40-58.6Vdc |
|
Short circuit protection |
Circuit breaker |
|
Circuit breaker phase specifications |
2pole,63A/63A(L1/L2) |
|
PV charging |
||
Number of MPPT groups |
2 |
|
Maximum PV open circuit voltage |
500Vdc |
|
PV operating voltage range |
90Vdc~485Vdc |
|
MPPT voltage range |
90Vdc~450Vdc |
|
Battery voltage range |
40-58.6Vdc |
|
Maximum PV input power |
12000W+12000W |
|
Maximum PVinput current |
32A+32A |
|
PV charge current(can be set) |
250A |
|
Charging short circuit protection |
Can protect,software immediately protects |
|
Wiring protection |
Reverse polarity protection |
|
Hybrid charging Max charger current specificat |
ions(AC charger+PV charger) |
|
Max charger current(can be set) |
0-250A |
|
















